Bokey TimeHello everyone, this is Bokey Watch Industry. In this watch review, I will introduce the SBF Factory Panerai Submersible Series PAM01232 carbon fiber watch. This is also the first 44mm carbon fiber replica watch model launched by SBF Factory (VS Factory). Now, let’s take a look at the detailed performance of the SBF Factory Panerai 1232.
First of all, I took the caliper to measure the overall data of the Panerai 1232 of the SBF factory, and the diameter of the watch was 44 mm, the thickness was 15 mm, and the weight was 128.5 grams.
Looking at the overall watch, SBF factory Panerai 1232 is made of carbon fiber material, whether it is the bezel or the case, it is made of relatively light carbon fiber material, and in terms of texture, it is also better to restore, like the circle mouth He has three different lines, you can see the change of the texture effect from different angles, and the texture is very explosive!
The mirror is made of sapphire glass, and has a fisheye effect, which is also the original design, like the kind from the small workshop does not have this effect, which is also a knowledge point to identify SBF factory 1232.
The dial is designed in blue, and the color difference is very well controlled, and if you don’t compare it with the original, you can’t notice it.
In terms of dial details, it is designed with three-dimensional studs like the original and filled with super luminous powder. The workmanship of the scale nails is relatively good, and you can see that whether it is a round nail or a strip nail, their edges are treated in black.
The font printing is also relatively three-dimensional, and the pointer workmanship has nothing to say, and there is no roughness to see when the details are enlarged. The calendar window is also the same as the original with a trapezoidal window, the calendar font is centered, and the size and thickness are all compared to the version.
The side of the carbon fiber case also features a longitudinal texture design. The crown guard on the other side is also made of carbon fiber material, and the time-setting crown is wrapped in carbon fiber as well. Regarding the time-setting function, simply put, pulling out the crown to the first position allows for independent quick adjustment of the hour hand, which drives the date forward or backward by turning the hour hand. Pulling out the crown to the second position allows for time adjustment.
The back is designed with a dense bottom, and the back cover is made of titanium with DLC black plating like the original. There is no problem with the overall lettering and pattern on the back cover, and it is basically restored in place. In terms of movement, it is still the P900 movement, which is exclusively owned by the SBF factory (VS factory), the quality of the movement is very reliable, after many years of market verification, the repair rate is very low, and the accuracy is also very high, the comprehensive daily error is within 8 seconds.
The strap is made of natural rubber, which is the same blue design as the dial, soft to the touch, and no traces of processing, like inferior tape will have a lot of processing outlets, this is because the material is not good, resulting in imperfect demoulding, and the natural rubber belt of SBF factory Panerai 1232 does not have this problem.
The buckle of the SBF Panerai 1232 is still made of Panerai’s 1232 pin buckle, made of titanium alloy and blackened by DLC.
Finally, we will end the evaluation of Panerai 1232 of SBF factory with the hand-started diagram of Bokey. In addition, Bokey wrist circumference is 16cm, and cousins who are worried that their wrists are too small to control can refer to it.
