Bokey TimeHello everyone, this is Bokey. This issue of old watches is new. Let’s talk about the ZF factory V3 version of Patek Philippe Calatrava classic series 5296G-010. I believe many watch friends still don’t know some details of the ZF factory Cara Zhuohua 5296Gv3 version. Next, Bokey will re-share its workmanship details to see if the V3 has upgraded those places. Is it worth buying?
Genuine parameters: Patek Philippe classic watch series 5296G-010 platinum watch, price: 197600
First of all, let’s measure the size data of the ZF factory V3 version Patek Philippe 5296G. Through actual measurement, the diameter of the watch is 38 mm and the thickness is 9 mm. The upgraded thickness of the V3 version is only 0.6 mm different from that of the genuine one, which is much better than the previous version. Because the overall thickness is reduced, it is better for the wearing experience, because this is a formal watch. The thinner the thickness, the easier it is to hide in the cuff.
Front appearance, let’s talk about the difference in case material first. The genuine 18K white gold is used, while the ZF factory 5296 is a 316L stainless steel case, which is relatively lighter in weight than the genuine one. As for the gloss, the entire bezel of this ZF factory classic series 5296G is polished with mirror finish, so in terms of gloss, it is very close to the platinum texture, but if there is a comparison of genuine products, it will be slightly inferior to the genuine one.
The mirror surface is made of sapphire crystal glass and is treated with an anti-glare process, making it relatively transparent as a whole.
After talking about the material, let’s talk about the workmanship of the dial. The 5296g dial of the ZF factory is ivory white, which will not be too yellow or dead white like other factories. The color control of the dial of the ZF factory is still better.
Point PATEK PHILPPE GENEVE uses ink printing process, which looks relatively regular, and the font size is also synchronized and genuine.
The pointer uses a toffee-shaped pointer. In fact, there is another brand of this pointer in use, and the old driver should know it, Jaeger-LeCoultre. But there are still some differences between Patek Philippe and Jaeger-LeCoultre, that is, the 5296G toffee needle has a line in the middle to separate it from the middle and make it into a slope surface, while Jaeger-LeCoultre polishes and sandblasts the toffee needle from the middle dividing line, but the PP is not sandblasted, it is all polished, which is a very classic needle shape. Let’s talk about the reduction degree of ZF. Although the whole needle is a kind of polished and glossy treatment to the naked eye, there is no serious problem found, so the whole needle, including the second hand, is good and relatively clean, which can be regarded as meeting the quality If you’re really serious about looking at it with a microscope, I can’t help it either, so there are some things that can’t be overly demanded of it.
The three-point position is the calendar window. The calendar window opening is also a relatively large design like the genuine one, and there is also a metal square frame. The font is also bold and fills the window.
This ZF factory 5296G wave note thinks it is a classic scale similar to a cannonball. To be honest, it is a bit similar. Because the front and back of it are widened, the shape is no problem, but it is very not simple. It is not a flat surface, there are several slopes on it, first of all, there is a branch line in the middle that slopes down on both sides. Then there are slopes in the front and back, which turn into a rhombus from the side, a very special-shaped three-dimensional scale. So it is a very challenging job to do this scale. Because it is too small, when you process it, each side has a total of four sides, and all four sides need to be polished to a certain brightness and finish, so when you put it on, it flashes particularly under the light. This is why I have been repeatedly emphasizing a problem. I have told you many times about this very simple business model, that is, its scale must be unique. If a watch is very simple and has three stitches and a calendar, then if you don’t work hard on the scale, your watch will be ugly, so sometimes the details are in this flash. Including dots and bars, the target is very accurate, and there is no deviation! And the font scale is clear and powerful, showing a refined matte texture, and the side view is also very three-dimensional.
The side of the case has been polished, and the curvature of the entire case is still relatively good. The curved place is curved, and the end of the four lugs is chamfered in a semicircle, which is relatively smooth to the touch.
On the other side is the straight-pull time-adjusting head, and the tooth spacing on the head is also relatively large. The Carla Zhuohua cross logo engraved on the top is also a three-dimensional relief process.
The back is designed with a transparent bottom, the glass on the bottom cover is also made of sapphire, and the entire back cover is relatively simple. It is polished with a large area of mirror surface, and there are also precious metal marks on the four lugs.
Looking at the movement again, this time the ZF factory V3 version 5296G has also been upgraded in the movement, using the Citizen 9015 modified genuine cal.324 movement deck, the appearance of the entire movement will be closer to the genuine, including the lettering and lines on the deck are also relatively clear, and the balance wheel position is also at 6 o’clock like the genuine.
In terms of straps, the ZF factory is still equipped with calfskin, but Bokey has exclusively customized the American crocodile leather, which is shown in the picture below. Whether it is from the texture, the texture will be softer than the original calfskin of the ZF factory, and the wearing experience is better. And it is also synchronized with the genuine quick-release raw ear design, which can be disassembled and installed by hand only by pushing the raw ear. The back also adopts a waterproof bottom, and there are also Patek Philippe brand logo information and other imprints.
The clasp is a relatively simple pin buckle design, the front and back are treated by mirror polishing process, and the gloss is also relatively bright.
There is also a brand logo and precious metal imprint lettering on the back.
Summary: This time, the ZF factory Patek Philippe Calatrava classic series 5296G-010 watch V3 version has reduced the overall thickness, as well as the improvement of the appearance of the movement, including the workmanship of the entire dial, which is relatively good. If you are looking for a first-line brand dress replica watch, you might as well include this ZF factory 5296 in your pocket.
