Bokey TimeHello everyone, this is Bokey Watch Industry. In the previous review, we discussed the details of the Clean Factory 4130 Panda Daytona. In this review, we will talk about the C Factory Black Ceramic Daytona, with the official model number Rolex m116500ln-0002. Other models such as the Platinum Daytona, Grey Rubber Daytona, and precious metal Daytonas will be released in May. Below, we will discuss the specific craftsmanship details of the C Factory Black Ceramic Daytona 4130 movement version through a combination of text and images.
Clean Factory Black Ceramic Daytona with 4130 Movement – Real Photos by Bokey
Authenticity: Rolex Cosmograph Daytona M116500LN-0002 Price: 113000
Review of Clean Factory Rolex Daytona 116500 Black Ceramic Daytona with 4130 Movement
Front details, first talk about the glass, the material is sapphire glass, C factory Daytona is better is that the glass will not appear white edges when installed, more transparent feeling, through the picture you can see that the edge has a scale reflection up, this is the real version of the original details
The dial uses Clean Factory’s own dial design. For the color scheme of the Black Ceramic Daytona, there is almost no color difference.
The font is also printed with a relatively three-dimensional sense, and the scale nails are polished with rounded corners, and mirror polishing is used, and the overall look is very textured, especially the light is particularly bright.
The pointer is a buff needle, here for the cousins under the popular science, in the modification circle, the BUFF factory is mainly famous for the substitute needle, by magnifying the picture several times, we can see that the three-dimensional sense of the BUFF needle is very strong, and the side view is also very thick, and the polishing is also relatively round without a burr feeling.
The central axis of the hands and the three small needle central axes are solid, and they are also made in the shape of a mushroom head, and the size of the three subdials is just right, including the font on the CD pattern will not be broken. In terms of color, Bokey feels a little whiter, and a little more silver gray will be more right.
The inner shadow lettering is also very in place, and the small crown at twelve o’clock and the large second hand are all neatly aligned
There is a code lettering at 6 o’clock, 221WF579, and one table and one number are not repeated.
Back to the circle, this time the C factory Daytona also uses the Clean factory’s self-produced Cerachrom ceramic speed scale substitute ring, this circle was also bought back by many modification players to change it on the N factory Daytona, and now it is directly installed at the factory, talking about the advantages of this circle, its main feature is that the scale color of the circle is very close to the genuine product, and there will be no paint loss in the later stage of wearing, as for the graying situation, the same is true for the genuine product, Mainly because his hands often touch him, causing some dirt to adhere to it, and it only needs to be cleaned with toothpaste to get back to new.
The glass has been mirrored before leaving the factory, so that its thickness and glass height are consistent with the original product. And the edge of the mirror has also been polished, and it feels round and does not cut your hands.
The effect of the mirror sinking is that the thickness of the Clean Factory 4130 Daytona can reach 12.2-12.3 mm, which is 0.3 mm thinner than the thickness of the previous N Factory Daytona, which is more authentic.
The connection between the case and the strap is also relatively close, and there will be no loosening, and this strap is also the same as the AR steel belt.
Looking at the strap again, the steel belt is made of the same steel belt foundry as AR, the material is 904L stainless steel, the whole is finely ground and brushed, the texture is very delicate, including the connection between the watch and the case.
The strap is coded 7CD
The four corners of the buckle are treated with R angles, which is very rounded.
The inside of the extension buckle on the back is also relatively clean
The case is made of 904L stainless steel and finished with a polished mirror. The lugs are also made of clear water chestnut angles, and there is no roughness to the touch.
There are three handles on the right side, the specific functions are as follows, and the middle is the time adjustment handle. The upper and lower two-digit timing buttons, the top is responsible for timing start and pause, and the bottom is the timing reset to zero, when using, the chronograph handle is unscrewed first, and the correct order is to start first and then pause and finally reset. The timing handle is a screw-in waterproof handle, remember to tighten the handle after use to prevent water ingress. The way to adjust the time is also the same as the original, the first gear is pulled open and directly clockwise to turn clockwise, and this movement has no calendar empty gear. If it is a 7750 movement, it can also be a first-gear movement on the market, but it is counterclockwise, so it can be distinguished whether it is a 4130 movement by adjusting the direction, and the winding feel will be a little lighter.
Clean Daytona has a robot cat sticker on the back cover.,I don’t know if this C factory owner really likes robot cats so much.。。。 Bokey thinks it’s better to stick pigeons, after all, you always put pigeons in factory C. . .
The back cover is also polished more finely, and the back is also engraved with brand logos and some codes
Caliber 4130 details and performance analysis:
The movement is still the Dandong self-produced 4130 movement that we are very familiar with, these are the same factory as the N factory, and the stability is the same, but there will be a difference, where is the difference? The movement lettering will be a little different, the N factory has been marked with the Rolex logo before leaving the factory, the N factory will be shallower, and the clean words belong to the post-engraving, then it takes back the movement is blank, without any lettering, this is the clean factory continues to type, so its lettering will be deeper and then a little thicker, on this point it will be a little different from the N factory, and the other words are the same. This movement is very stable and durable, the N factory has been launched for three years, the repair rate is really very low, it can really be with the current ETA7750 has a fight, the time is stable, the error is small, it is really good. If the clean factory is officially launched, it will also press the price that was raised by the N factory before, and after it comes out, the price of the N factory will collapse, so it will also let more cousins play well with less money, this Daytona is indeed very good, so the 4130 movement launched by the clean factory is also worth starting, and if it has just started to ship, the number may be relatively small.
In terms of movement, we look at the details, Bokey will not go into too much detail, only to say the key point, that is, in terms of lettering, it will be deeper than the previous N factory’s lettering, mainly because now Dandong Movement Factory only gives blank 4130 movement to avoid the previous water meter incident, so after the C factory gets it, it can only find the processing plant to engrave, and it will not affect the stability of its movement.
KIF shock absorbers and column wheel structures are all structures that will only be used on high-end watches, and the two words can be summed up as “true fragrance”
In terms of luminous effects
Finally, to summarize for you, this clean factory 4130 Daytona uses a C ring, C disk, buff pointer, AR factory steel belt, n factory 4130 movement, the stability is very good, the factory is really the top full match, and it is also the mirror sinking, the thickness is also the same as the original, if you get it, you don’t need to change it at all, so this clean factory 4130 Daytona is a good choice.
