Bokey TimeHello everyone, this is Bokey. In this new product review, we bring you the OMEGA ceramic Seamaster 300 in black with rose gold accents launched by OR factory. The official model is: OMEGA Seamaster series 210.62.44.20.01.001 watch. This watch has a diameter of 43.5mm. Compared with the common Seamaster 300m diving watch with a diameter of 42mm, it is a little larger. But the difference on the wrist is not very obvious. First, let’s show you the on-hand picture of the OR factory’s black-gold ceramic Seamaster 300 for your reference. Bokey wrist circumference is 16.cm.
The ceramic Seamaster 300 in black and gold launched by OR factory this time is also based on the previous steel Seamaster 300’s great success. And the processing technology of this model is relatively complex. Except for the bezel holder and the two side crowns which are made of steel with electroplated rose gold, the others are all ceramic materials.
First, let’s look at the overall appearance and then talk about some details. The watch mirror is made of sapphire-coated glass. The jet-black dial is also made of black ceramic, with a strong texture. Moreover, ceramics will never fade. The laser-engraved wavy decoration is very eye-catching under light!
The details on the dial of the OR factory’s black-gold ceramic 300 are basically flawless, and the luminous filling of the scale nails is also relatively full.
In terms of the hands, there are no burrs when viewed from the side, and the axis is also hollowed out according to the original version.
Looking at the ceramic bezel again, the inverted triangle and the hour markers on the bezel are all raised.
The corresponding part of the inverted triangle also has precious metal lettering.
The side of the ceramic case has a brushed finish, while the lug area is polished. The case shape and craftsmanship are all in line with the original design. At ten o’clock, the genuine product has a helium escape valve, while the OR factory version has no actual function, but it can also be loosened.
At three o’clock is the time-adjusting crown. There is a relief of the resistance logo on the top. Briefly talk about the functions. Loosen counterclockwise, wind clockwise, pull out to adjust the time directly. It synchronizes with the one-gear time-adjusting design of the genuine product.
The back cover is also made of ceramic material and synchronizes with the NAIAD locking technology of the genuine product. This can ensure that the words engraved on the directional screw-in back cover always remain in the correct position. There are also brand logos and codes on the four corners of the back of the watch.
Through the sapphire glass mirror, you can see that the OR factory is equipped with an 8806 movement. This movement is transformed from the Seagull 2824. From the overall appearance, it is very close to the original. The stability is also very excellent and can provide about 40 hours of power reserve. The genuine product has 55 hours.
For the strap, black rubber material is used and matched with a ceramic pin buckle. Both can be used interchangeably with the genuine product.
Luminous effect, synchronizing with the two-color luminous design of the genuine product.
Finally, let’s take a look at the size data of the OR factory’s black-gold ceramic Seamaster 300. Measured results show that the diameter is 43.5mm, the thickness is 14.5mm, and the weight is 119 grams. The data is basically the same.
