Bokey TimeHello everyone, I’m Bokey. Today, I’d like to introduce to you the rose gold Yacht-Master newly launched by Factory C. The official model is Rolex Yacht-Master series m126655-0002. This gold Yacht-Master was first launched by Factory N and sold quite well at that time. It was equipped with the Seagull 2836 movement. Later, Factory AR launched a 904L steel version, which was also equipped with two movement configurations, the 2836 and 3135. However, the 3135 movement of Factory AR was relatively inferior. Under the craftsmanship at that time, these two factories were quite good, but in comparison now, they are a bit lacking. Now, the gold Yacht-Master launched by Factory C is equipped with the Shanghai 3235 movement. We can see a small crown at the 6 o’clock position. The existence of this small crown indicates that the movement is not the 3135, but the new 3235 movement version of Rolex. Now, let’s take a look at the performance of the 40mm diameter and 3235 movement version of Factory C’s gold Yacht-Master.
First, let’s take a look at the craftsmanship of the bi – directional rotating ceramic bezel. We can see that the entire bezel is a combination of a matte black base and polished scales. Here, we mainly focus on the cutting process of the scales. Judging from the pictures, there are no obvious processing marks, and the reflectivity of the entire scale is relatively high, which looks very comfortable. The bi – directional rotating ceramic bezel has distinct gears when rotating, unlike the GMT which is not so clear.
The watch mirror is made of sapphire glass. The calendar magnifier at the 3 o’clock position is also coated with a light blue film. The calendar font is also quite accurate, no longer the particularly thick and large font.
The height of the glass does not protrude much, which is also in line with the original.
Let’s talk about some details on the dial. First, let’s talk about the printing on the entire dial. Bokey thinks that the printing process on the dials of the three Yacht – Masters launched by Factory C this time has been greatly improved. The ink feeling is stronger than before, and the advantage of this is that it looks more clear and three – dimensional. Through the pictures, we can see that the small yellow crown at the 12 o’clock position and the English of the Rolex brand both have a slightly protruding effect.
The red font “YACHT – MASTER” at the 6 o’clock position is also relatively protruding. It is no longer a simple flat printing, and the entire dial has achieved a qualitative leap. Bokey is not exaggerating. Watch enthusiasts can observe it carefully after getting the real object. Personally, I think it’s quite comfortable.
The six – nine batons and the triangular scale at the 12 o’clock position have all been rounded and polished, which is also a standard in the industry.
The hands are relatively thick, and the central axis is relatively thin, not feeling empty. Here, let’s briefly talk about a knowledge point for identifying Factory C’s gold Yacht – Master. Currently, the yacht code of Factory C starts with 0K0. If the yacht you bought does not start with this code, it may not be from Factory C. That is, the engraved characters inside the 6 o’clock position. For example, the code of this Factory C gold Yacht – Master is 0K0333x3.
The watch case is made of 904L stainless steel and then electroplated with rose gold. The genuine product is made of 18K Everose gold. In terms of overall color, Factory C’s restoration is relatively close, but there is still a gap in weight compared to the genuine product. Let’s simply measure the overall data of the watch. Through actual measurement, the weight is 109.5 grams, which is about 60 grams less than the genuine product. If you wear the genuine product, the sense of weight is more obvious. However, this Yacht – Master of Factory C also has a certain sense of weight when worn, not feeling flimsy.
In terms of other data, the diameter of the watch is 40mm, and the thickness is 11.7mm. The size and thickness are consistent with the genuine product.
The entire side of the watch case is processed with a polishing process, and the case shape is also quite accurate.
The details of the crown on the other side are also well – done. The three dots below the embossed small crown are also smaller on both sides and larger in the middle. The edges and corners of the entire crown are relatively distinct, and it doesn’t feel sharp when adjusting the time. Briefly speaking about the functions, unscrew the crown counter – clockwise, wind the watch clockwise. Pull out one position to adjust the calendar, and in the second position, turn the crown counter – clockwise to adjust the hour hand to move clockwise. The time – adjusting direction is opposite to that of the 3135 movement, which is in line with the original.
It has a solid – caseback design. The brushing and polishing parts of the caseback are quite in place. The four lugs also have precious metal marks. Here, let’s briefly mention that the genuine product changed 750 to AU750 in the second half of 2021. Factory C has done this correctly without over – doing it. The movement is still the Shanghai 3235 movement. It runs stably and reliably, but the power reserve is slightly lower than that of the genuine product, only about 48 hours, while the genuine 3235 movement has about 72 hours.
The watch strap is made of fluororubber, which is very elastic and not flabby because it contains a memory steel sheet inside. The surface texture has a slightly grayish feeling, not pure black, which is relatively close to the original one that Bokey has come into contact with. Moreover, this strap of Factory C contains fluorine, which has the function of not being easy to attract dust. If it is an ordinary non – fluorine rubber strap, it is easy to attract dust, and the texture is not so comfortable.
In terms of the watch buckle, the brushing and polishing of the entire buckle are done very well. The small crown of the safety type is also exquisitely made. The inside of the extension buckle is relatively clean, and the several corners have also been rounded and polished. It doesn’t feel sharp when touched. The craftsmanship of this buckle is the same as that of Factory C’s Daytona, Submariner and other series before. They are all processed by the steel – strap foundry of Factory AR. This is also a relatively good buckle on the market.
Let’s take a look at the precious metal details and the dragon – phoenix logo inside the buckle. Here is a knowledge point. Only the all – gold models of genuine Rolex watches have the Saint Bernard dog head logo and the balance stamp, while the two – tone models do not have these marks.
Through the pictures, we can see that both the Saint Bernard dog head logo and the balance mark are relatively clear, and the code is 1PD.
It has the same ice – blue luminous effect as the genuine product.
Summary: The Rolex Yacht – Master can be said to be a very classic and popular sports model. Among Rolex watches, the most popular ones are the Submariner series, followed by the Daytona series. The popularity of these two is about the same. However, if you think the Daytona is too complicated and are afraid of wearing the same watch as others because many people wear the Submariner, then you can choose this gold Yacht – Master of Factory C. At the same time, there is also the white – gold Yacht – Master of Factory VS for selection. However, its diameter is 42mm, while this gold Yacht – Master of Factory C is 40mm. The two differ in size and movement, but both are worth buying. The above is the detailed review of the “Factory C Rolex gold Yacht – Master m126655 – 0002” in this issue. The pictures are slightly compressed. For more high – definition real – shot details, please consult directly.
